FMC+    

Direct RF Sampling ADC   Up to 10 GHz Input BW, Quad Channel

Direct RF Sampling ADC   Up to 10 GHz Input BW, with DAC, Dual Channel

FMC

L-Band Transceiver  200 MHz  BW ADC   –  400 MHz BW DAC

L-Band Tranceiver   1200 MHz BW ADC  –  400 MHz BW DAC

FMC Timing Module

FMC+ VITA 57.4 Products

Direct RF Sampling Multi-Channel Analog-to-Digital Converter (Analogue Receiver)

Directly sample input frequencies from DC to above 10 GHz. Two versions are offered, a single ADC chip FMC+ module and a dual ADC chip version. A single ADC chip can be configured for two channels in one ADC.    ADC Part Number- TI ADC12DJ3200

Up to 6.4 GSPS in single channel mode and up to 3.2 GSPS in dual channel mode. Analog input bandwidth (-3dB) is 8.0 GHz (Typ) and the usable input frequency range is >10 GHz.

JESD204B output interface.

Module Data Sheet

FMC VITA 57.1 Products

FMC L-Band Transceiver 200 MHz ADC BW, 400 MHz DAC BW

The FMC-XCVR-1 uses an analog mixer to center 200 MHz of the analog L-Band input (950 MHz—2150 MHz input frequency range) at Fc=0. The 200 MHz bandwidth is then digitized by a 500 MSPS Complex ADC, with the LVDS output routed to the FMC connector. The FMC-XCVR-1 also features an IQ 16-bit DAC, followed by an IQ modulator to provide up to 400 MHz bandwidth between 950 MHz-2150 MHz. The input and output center frequencies are independently tunable…… Module Data Sheet

FMC-XCVR-1 Block Diagram

FMC Wideband L-Band Transceiver 1200 MHz ADC BW, 400 MHz DAC BW

The FMC-XCVR-2 uses an analog mixer to center 1200 MHz of the analog L-Band input (950 MHz—2150 MHz input frequency range) at Fc=0. The 1200 MHz bandwidth is then digitized by a 1.6 GSPS Complex ADC, with the LVDS output routed to the FMC connector. The FMC-XCVR-2 also features an IQ 16-bit DAC, followed by an IQ modulator to provide up to 400 MHz bandwidth between 950 MHz-2150 MHz. The input and output center frequencies are independently tunable……. Module Data Sheet

FMC-XCVR-2 Block Diagram

FMC Timing Module

The Apogee FMC Timing module (P/N 454-0103-01) receives external 10 MHz and 1PPS references and distributes them to the FMC connector for use by the Carrier. The timing module also re-drives a copy of the 10 MHz and 1PPS back out on SMA connectors for use by follow-on equipment. The module features Runt Pulse Eliminators that prevent any short cycle or “runt” pulses during source switchover. The module also features an Analog Devices AD9548…… Module Data Sheet

Other products include analogue receiver, FMC cable, cards, boards, and interface.

FMC Timing Module Block Diagram